The reversible design of the box enables the door to opened from the left or right, position
the rubber gromet accordingly.
Position the tap box around the tap, leaving sufficient space to turn the tap, but also making sure that when the connectors
and hose are fastened to the tap there is enough room to maneouvre the hose through the open gromet.
There is an additional sheet of insulation included to place against your wall, this will also help as a guide to
line up your tap.(this will work on the majority of outside taps.)
Incorporated also is a foam insulation pack to provide additional tap insulation.
Each Box comes complete with the following:-
- 2 x 1/2" Hose Connectors
- 1 x 1/2" and 3/4" Tap Connector
- 1 x 1/2" 2 way Connector
- 1 x 260mm long 1/2" Hose
- 2 x rubber gromets
- 1 x insulation to place on wall
- Complete with fittings & fixing instructions
- Foam Insulation Pack
The Tap Box kit comes complete with a foam insulation pack to provide additional insulation to
the tap and hose. This is easily fitted around the tap.
The first piece of foam goes around the tap itself and secured with zip ties, the second fits around the hose fitting and the hose pipe,
secured at the top with a zip tie as shown in the photo. (Some triming may be required).
Should you require any further information on our Tap Boxes please contact us.
Trade enquiries welcome.
Home |
